Rinco

The REK / B offers all advantages of the high technical level of the OMEGA III series, particularly regarding precision and reliability. The machine may be integrated in an automatic production line and controlled via a higher- ranking control system (PLC)

Options:
Hydraulic oil brake
Working table
Housing
Light curtain
Rotary table
Control of external periphery

Advantages:
Easy programming via touch panel TP 270.
Display of time-travel-curve and pressure-time-curve after the welding cycle on a graphic display with plain text.
Regulation of the welding forces via proportional valve technology.
Storage of 99 welding programs; all parameters can be called upon immediately.

Type REK / B

The machine REK / B offers many possibilities for analysis, control and regulation.

Three welding models in order to meet the requirements of each application.
Positioning of the spin head prior to and after the welding process.
Display of the ongoing process parameters (welding time, welding travel).
Documentation of the ongoing process parameters via printer (interface RS 232).

Welding modes

Start of rotation:
Prior to contact with the part to be welded
At contact with the part to be welded
After contact with the part to be welded

Stop of rotation
Constant time
Constant parts time
Constant travel

Control

Input of the process parameters via touch panel TP 270
Display of actual process parameters via touch panel (welding time, welding travel, welding height)
Display of the travel- time curve and the pressure-time curve after the welding cycle, on a graphic display with plain text.
The welding forces are regulated via proportional valve technology.
Three welding modes in order to meet the requirements of each application.
Documentation of the actual process parameters via printer (RS232)

Technical data
Electrical data: 3 x 400 V + earth
Compressed air: 6 bar clean / dry air

Stroke: 160 mm
Height adjustability: 300 mm
Weight: 225 kg
Servo-motor drive (max. torque of 14,5 Nm up to 21,0 Nm)
R.p.m. range from 0 to 3000 1/min
Maximum weld power 1850 N
Positioning with angular accuracy of +/-0,5°
Welding time up to max. 99 sec
Cooling time up to max. 99 sec
Optical travel control system, resolution 0,02 mm
Power control (8 power steps) via proportional valve technology
Variable acceleration and braking characteristics
Precise adjustment of the welding tool
Maximum diameters of the parts to be welded up to 100 mm in semi-crystalline and amorphous plastics
Two-hand safety sensor
Emergency-off
Rotary driver max 1,5 kg
Interface